 |
| There are 4 options
depending on your needs
Super Guard SL
Hi Guard SL
Guard 51 SL
Floor 51 SL
|
|
Super
Guard SL |
| |
| This is our highest performing heavy
duty flooring system. Super Guard SL has superior chemical
resistance to a wide combination of acids, caustics, and solvents
including methylene chloride.
Super Guard SL has excellent adhesion to both dry and damp
substrates. It can be applied to concrete that has been cured
less-than 28 days, including outside slab on grades. Due to it's
improved toughness Super Guard SL has superior thermal shock and
impact resistance, enabling Super Guard SL 1/4 inch trowelled
applications to withstand years of heavy traffic.
Super Guard SL is recommended for secondary containment of
hazardous chemicals including 30% hydrofluoric acid, 50% hydrogen
peroxide, methylene chloride, glacial acetic, acetone and
trichlorethylene.
Contact us for the full list of chemicals. |
|
Typical Uses Include:
Truck Unloading Areas
Large Tank Farms
Drum Storage Areas
Acid Etching
Metal Plating Lines
Solvent Recycling Centers
Chemical Processing Plants
Other Highly Corrosive Areas
Areas Subject to mechanical wear where secondary
containment for hazardous materials is mandated by regulatory
agencies. |
|
Hi Guard SL |
| |
| Hi Guard SL has excellent chemical
resistance to many concentrated acids, including 98% sulfuric acid,
as well as most alkalis and some solvents. Hi Guard SL will
withstand frequent heavy mechanical wear need of constant
maintenance.
Hi Guard SL is particularly effective in damp conditions, even on
slab-on grades. This resin rich formula requires no top sealer
coat, this reduces downtime and improves resistance to moisture
penetrations.
Hi Guard SL has excellent resistance to virtually all caustics
and acids such as 98% sulfuric, 85% phosphoric, 30% chromic, 30%
nitric and 37% hydrochloric.
Contact us for the full list of chemicals. |
|
Typical Uses Include:
Chemical Plants
Secondary Containment
Chemical Storage Rooms
Other High Corrosion Areas
Recommended for withstanding 98% sulfuric acid |
|
Guard 51 SL |
| |
| Guard SL 51 is USDA Approved for use
in food plants. Guard SL 51's high chemical resistance, resilience
and resin-rich formulation provides extra security against premature
failure due to chemical attack, thermal or mechanical shock, as well
as heavy wear.
Normally applied over concrete, Guard SL 51 has excellent
adhesion to a wide variety of surfaces such as metal, wood, wood
block, brick, tile and vinyl tile. Guard SL 51 is especially good
at bonding to damp surfaces.
Guard SL 51 is recommended for secondary containment of hazardous
chemicals including 50% sulfuric acid, 30% nitric, 30% phosphoric,
50% sodium hydroxide, and most C.I.P. cleaners.
Contact us for the full list of chemicals. |
|
Typical Uses Include:
Food/Beverage/Diary Plants
|
|
Floor 51 SL |
| |
| Floor 51 is a low odor 100% solids
trowelled epoxy. Floor 51 is a resin-rich system and thus will
resist liquid or vapor penetration far longer than conventional top
coated epoxy systems.
Floor 51 is an ideal resurfacer in existing facilities, due to
its lack or odor, single step application and quick drying
capabilities. With added non-skid material this can be an excellent
anti-slip solution. Floor 51 has impact strength greater than 160
inch pounds.
Recommended for areas seeing oils, greases, most lubricants,
caustics, moderate concentrations of acids and few solvents.
Contact us for the full list of chemicals. |
|
Typical Uses Include:
Metal Fabrication Plants
Machine Shops
Truck Unloading Bays
Some Food Establishments
Auto Service Centers
Oil Change Facilities |
|
|
